INTEGRATIVE HEAT PIPE PRESSURIZED SYSTEM
ADVANTAGE:
Our Heat pipe solar system use inner stainless 316(different than common market 304 material) which is reaching medical surgical equipment level, reduces the chromium content, increase the content of nickel, molybdenum, and increase the corrosion resistance greatly enhance thereby ,our system can use in the environment which water not good, or seawater, long lifetime stay.
And heat pipe design solar water heater system which is good for replacement after some years of using. we clean the copper head, and change new to make sure that the solar system work as new.
All our system temperature can reach 100”C under the good sun for somedays without using water. Which others product can only have temperature around 50oC-60oC When you choose our solar water heater system,90% time of year use solar energy and very few time use electricity while rainy season but all the products in market they use electricity power to heat water instead of solar energy. because they fix the heater element inside solar by automatic setting to be 80°C directly.And our heater element use controller panel to switch off when need heating with electricity power, you can switch on. And all our controller panel and electricity element we adjust the power range to be 230+10% which is more suituable for Kenya power to avoid the broken of unsteady voltage.
Tank | Outer Tank | Material: 0.4mm SUS304-2B stainless steel Diameter: 420mm/460mm/480mm |
InnerTank
| Material:SUS304-2B stainless steel Pressure Rating: 5 Bars. Diameter and Thickness:310mm/360mm/380mm(0.40/0.58mm) | |
Insulation Layer | 50/55/60mm high density polyurethane foam | |
Solar Collector | Material: three target tube(SS/CU/AL-coating) Size: Φ47x1500mm/Φ58×1800mm No of Tubes: 20 Pieces, Heat Pipes | |
Support Frame | Material:1.5mm import heat zinc steel plate Installation angle: 27°, 38°, 45° |