Brand: AKE
Valve Size: Up to 3.0 inches
Capacity: 0-10 liters
Media: Air, Water, Gas, Fuel
Body Material: Bronze
Tank Material: Brass
Internal Parts: Brass and Stainless Steel
Seat Disc: Silicone
Pressure Spring: Stainless Steel
Max Rated Pressure: 0-5 Bar, 5-10 Bar, 10-15 Bar, 3 Bar
Set Pressures: 75, 87, 100, 125, 150 psi (0.5, 0.6, 0.7, 0.8, 1.0 MPa)
Pressure Tolerance: +5%, -10%
Temperature Relief: 210°F (99°C) standard
Temperature Range: 65°C to 99°C
Temperature Tolerance: ±5°C
Service: Hot Water
Standard Compliance: ANSI Z21.22
Minimum Order Quantity: 1 Piece
Pressurized solar water heaters
Gas heaters
Electric water heaters
Fuel-based water heaters
Heat pump water heaters
Hot water storage tanks
Boilers and sensitive function heaters
Positioning: Install on the top or side of the water heater, ensuring the temperature-sensing element is immersed within the top 6 inches of the tank.
Pipeline Setup: Attach an elimination pipeline under the relief valve, with the terminal station at least 6 inches above the floor drain for easy removal and water observation.
Orientation: Can be directly installed on the top or side of the water heater.
Annual Check: Lift the relief valve handle at least once a year to ensure the waterway remains unblocked.
Safety Precautions: Verify that the elimination pipeline directs hot water to a safe location to prevent bodily injury.
Valve Inspection: If no water flows when the handle is lifted, the valve may be faulty. Immediately turn off the water heater and inspect or replace the valve.
Login Or Registerto submit your questions to seller
No none asked to seller yet